Cell Cycle Assays-Part I

From alleleblog: http://allelebiotech.com/blogs/

This is the first part of a series of blogs about using fluorescent proteins in cell based assays with established examples, a common theme here at the AlleleBlog.

FUCCI Cell Cycle Sensor

The FUCCI Cell Cycle Sensor is composed of a red (RFP) and a green (GFP) fluorescent protein fused to different regulators of the cell cycle: cdt1 and geminin.

During the cell cycle, these two proteins are ubiquitinated at different time points by specific ubiquitin E3 ligases, which tag them for degradation in the proteasome. The E3 ligases’ activities are regulated temporally and result in the biphasic cycling of GERMINI and CDT1 levels during the cell cycle. In the G1 phase of the cell cycle, GERMINI is degraded; therefore, only CDT1 tagged with RFP is present and appears as red fluorescence within the nuclei. In the S, G2, and M phases, CDT1 is degraded; only GERMINI tagged with GFP is present, resulting in cells with green fluorescent nuclei.

During the G1/S transition, when CDT1 levels are decreasing and GERMINI levels increasing, both proteins are present, so are the tagged fluorescent proteins. When the green and red images are overlaid, nuclei fluoresce yellow. This dynamic color change, from red-to-yellow-to-green, represents the entire cell cycle. This representation can be used to study the effects of elements that may influence cell cycles.

Sakaue-Sawano A, Kurokawa H, Morimura T, Hanyu A, Hama H, Osawa H, Kashiwagi S, Fukami K, Miyata T, Miyoshi H, Imamura T, Ogawa M, Masai H, Miyawaki A.Visualizing spatiotemporal dynamics of multicellular cell-cycle progression. Cell. 2008 Feb 8;132(3):487-98.

CCNB1-CyclinB(NT)-GFP

In late S phage, CCNB1 promoter will be switched on to drive the expression of Cyclin B N-terminus-GFP expression; thereafter the fluorescent signal will be switched off at the destruction box in Cyclin B N-terminus at the end of Mitosis phase. During the intervening phase the fusion reporter protein will translocate from cytoplasm to nucleus by the cytoplasmic retention signal in the Cyclin B N-terminus.

Thomas N. Lighting the circle of life: fluorescent sensors for covert surveillance of the cell cycle. Cell Cycle. 2003 Nov-Dec;2(6):545-9.

GFP-PCNA/YFP-PCNA
GFP-PCNA, a fusion of GFP and PCNA, has been widely used as a convenient tool to monitor the progress of S phase. At the onset of S phase, GFP-PCNA translocates into the nucleus; at mitosis the nuclear envelope breaks down and the nuclear accumulation of PCNA-GFP dissipates.

New Product of the Week 102510-103110:

lenti-shRNA expression vector with Puromycin-2A-RFP for custom RNAi virus packaging only. email: RNAi@allelebiotech.com

Promotion of the Week 102510-103110:

Promotion of the week: prepackaged lentivirus expressing IL15, IL2, $25 off, this week only.

Allele Custom Services for Drug Screening Companies

http://allelebiotech.com/blogs/2010/06/allele-custom-services-for-drug-screening-companies/
Many target discovery and validation programs can benefit from RNA interference, fluorescent proteins, stem cells, and viral delivery systems. However, applications of these technologies require special reagents and laboratory know-how. Even when available, many generic reagent kits are not tailored for your particular needs in screening or validation.

At Allele, we accelerate your discovery efforts with custom RNAi screening, fluorescence based assays, and cell model development services.

1) Our RNAi platform, based on our patented shRNA/miRNA technologies, use DNA linear template, plasmid, lentivirus, retrovirus, or baculovirus vectors that prompt cells to endogenously express RNAi. As a result, our screens offer advantages over synthetic siRNAs:
• Higher levels of consistency
• Greater delivery and gene silencing efficiencies
• Accessibility to difficult-to-transfect cells, including primary cells
• Potential for inducible RNAi expression
• More persistent silencing with shRNA under Allele’s own IP–you may not need to license siRNA patents!

2) Fluorescent proteins (FPs), which can span the entire visual spectrum, have become some of the most widely used genetically encoded tags. Genes encoding FPs alone or as fusions to a protein of interest may be introduced to cells by a number of different methods, including simple plasmid transfection or viral transduction. Allele Biotech is one of a few companies that develop and improve FPs through fundamental research. We have so far achieved:
• The brightest cyan and green FPs, true monomers for minimum artifact or cytotoxicity
• The brightest yellow and red FPs from lancelet, only FPs from vertebrate
• mTFP1 as the best FRET donor by 3 independent reports
• Photoconvertible FPs for super imaging or kinetic labeling
• Delivery on plasmid, retrovirus, lentivirus, baculovirus vectors

3) As a major advancement in the stem cell field, it has recently been shown that mouse and human differentiated cells may be reprogrammed into stem-like, pluripotent cells by the introduction of defined transcription factors. These induced stem cells (iPSCs) provide unprecedented resources of cells of different differentiation stages for functional testing and drug screening. Allele Biotech develops and provides state-of-the-art reagents in convenient forms for iPSC production
• iPS factors carried on lentivirus, retrovirus, baculovirus for different cell types
• Availability in combination with fluorescent proteins under own IP, and drug resistant genes
• 4-in-1 or 2-in-1 effective use of iPS factors on one viral vector
• Feeder cells of human origin expressing factors essential for stem cell culturing

4) Introduction of protein factors, miRNA, promoter-reporter, and virtually any other genetic element of interest via the most efficient viral packaging systems.
• Introducing protein-FP fusion, promoter-FP reporter, photoactivatable factors for cell-based assays
• Introducing critical factors for cell immortalization
• Episomal or integrated expression using baculoviral vectors
• High throughput, systematic expression of whole class of molecules in any type of cell
• High titer viral packaging at low cost for delivery to animal tissues

In addition, the Allele team can provide custom-designed assays that can be used for assaying enzyme activities in almost any pathway, such as the EGF pathway, TNF response/apoptosis pathway, nuclear receptors, etc. We utilize technically advanced methods to provide our partners with advantages over alternative methods or other services.

New Product of the Week 06-28-10 to 07-03-10: Eco-friendly mammalian tissue culture plates, 40% less plastic to the environment, 40% less cost to your budget, contact our sales rep today for quotes and details.

Promotion of the Week 06-28-10 to 07-03-10: Oct3/4 iPS lentivirus with RFP as marker, new to the market, this week only all kits containing Oct3/4-RFP same price as the original, non-RFP versions, save ~$50!

Fluorescent Protein-Based Assay Development

This blog will be the template of Allele's new cell based assay service landing page. http://www.allelebiotech.com/allele3/index.php

Overview:

Originally cloned from the jellyfish Aequorea victoria and subsequently from many other marine organisms, fluorescent proteins (FPs) spanning the entire visual spectrum have become some of the most widely used genetically encoded tags. Unlike traditional labeling methods, FPs may be used to specifically label virtually any protein of interest in a living cell with minimal perturbation to its endogenous function. Genes encoding FPs alone or as fusions to a protein of interest may be introduced to cells by a number of different methods, including simple plasmid transfection or viral transduction. Once expressed, FPs are easily detected with standard fluorescence microscopy equipment.

Factors that should be taken into account when designing an FP-based imaging experiment include the desired wavelength(s) for detection, the pH environment of the tagged protein, the total required imaging time, and the expression level or dynamic range required for detection of promoter activity or tagged protein. Individual FPs currently available to the research community vary considerably in their photostability, pH sensitivity, and overall brightness, and so FPs must be chosen with care to maximize the likelihood of success in a particular experimental context.

FPs as fusion tags:

Use of FPs as fusion tags allows visualization of the dynamic localization of the tagged protein in living cells. For such applications, the cDNA of a protein of interest is attached in-frame to the coding sequence for the desired FP, and both are put under the control of a promoter appropriate to the experimental context (typically CMV for high-level expression, though other promoters may be desirable if overexpression of your protein of interest is suspected of producing artifacts). The most basic uses for fluorescent protein fusions include tracking of specific organelles (fusions to short organelle targeting signals) or cytoskeletal structures (fusions to actin or tubulin, for example). More advanced uses include tracking receptors or exported proteins. In most cases, it is critical that the FP used for fusion tagging be fully monomeric, as any interaction between fusion tags is likely to produce artifacts, some of which may be hard to recognize in the absence of other controls. While in most cases FP fusions do not interfere with normal protein function, whenever possible, FP fusion proteins should be validated by immunostaining the corresponding endogenous protein in non-transfected cells and verifying similar patterns of localization.

FPs as expression reporters:

FPs are highly useful as quantitative expression reporters. By driving the expression of an FP gene by a specific promoter of interest, it is possible to produce an optical readout of promoter activity. Use of the brightest possible FP ensures the best dynamic range for such an experiment. Because dynamic localization is not generally an issue for expression reporter applications, it is possible to use non-monomeric FPs for this purpose, opening up additional possibilities for multiple wavelength imaging. In order to obtain more reliable quantitative data and to correct for likely variations between individual cells in expression reporter experiments, the use of two spectrally distinct (e.g. green and red) FPs is advisable. By driving expression of one FP with a constitutive promoter and a second FP with the promoter of interest, the ratio of the two signals provides a quantitative readout of relative activity. Averaged over many cells, this technique should provide statistical power necessary for quality expression level experiments. Because FPs normally have a very slow turnover rate in mammalian cells, it may be desirable to add a degradation tag to your FP to enhance temporal resolution when measuring highly dynamic promoter activity.

Overview:

Originally cloned from the jellyfish Aequorea victoria and subsequently from many other marine organisms, fluorescent proteins (FPs) spanning the entire visual spectrum have become some of the most widely used genetically encoded tags. Unlike traditional labeling methods, FPs may be used to specifically label virtually any protein of interest in a living cell with minimal perturbation to its endogenous function. Genes encoding FPs alone or as fusions to a protein of interest may be introduced to cells by a number of different methods, including simple plasmid transfection or viral transduction. Once expressed, FPs are easily detected with standard fluorescence microscopy equipment.

Factors that should be taken into account when designing an FP-based imaging experiment include the desired wavelength(s) for detection, the pH environment of the tagged protein, the total required imaging time, and the expression level or dynamic range required for detection of promoter activity or tagged protein. Individual FPs currently available to the research community vary considerably in their photostability, pH sensitivity, and overall brightness, and so FPs must be chosen with care to maximize the likelihood of success in a particular experimental context.

FPs as fusion tags:

Use of FPs as fusion tags allows visualization of the dynamic localization of the tagged protein in living cells. For such applications, the cDNA of a protein of interest is attached in-frame to the coding sequence for the desired FP, and both are put under the control of a promoter appropriate to the experimental context (typically CMV for high-level expression, though other promoters may be desirable if overexpression of your protein of interest is suspected of producing artifacts). The most basic uses for fluorescent protein fusions include tracking of specific organelles (fusions to short organelle targeting signals) or cytoskeletal structures (fusions to actin or tubulin, for example). More advanced uses include tracking receptors or exported proteins. In most cases, it is critical that the FP used for fusion tagging be fully monomeric, as any interaction between fusion tags is likely to produce artifacts, some of which may be hard to recognize in the absence of other controls. While in most cases FP fusions do not interfere with normal protein function, whenever possible, FP fusion proteins should be validated by immunostaining the corresponding endogenous protein in non-transfected cells and verifying similar patterns of localization.

FPs as expression reporters:

FPs are highly useful as quantitative expression reporters. By driving the expression of an FP gene by a specific promoter of interest, it is possible to produce an optical readout of promoter activity. Use of the brightest possible FP ensures the best dynamic range for such an experiment. Because dynamic localization is not generally an issue for expression reporter applications, it is possible to use non-monomeric FPs for this purpose, opening up additional possibilities for multiple wavelength imaging. In order to obtain more reliable quantitative data and to correct for likely variations between individual cells in expression reporter experiments, the use of two spectrally distinct (e.g. green and red) FPs is advisable. By driving expression of one FP with a constitutive promoter and a second FP with the promoter of interest, the ratio of the two signals provides a quantitative readout of relative activity. Averaged over many cells, this technique should provide statistical power necessary for quality expression level experiments. Because FPs normally have a very slow turnover rate in mammalian cells, it may be desirable to add a degradation tag to your FP to enhance temporal resolution when measuring highly dynamic promoter activity.

New Product of the Week 03-15-10 to 03-21-10: Oct4-Sox2 2-in-1 lentivirus ABP-SC-LVI2in1 for effective iPS generation link: http://www.allelebiotech.com/shopcart/index.php?c=132&sc=122.
Promotion of the Week 03-15-10 to 03-21-10: 5% off plate oligos at all scales! www.allelebiotech.com/allele3/Oligo_96Plate.php We are doing our “window promotion” again, during a hour-long window, get any Allele’s High efficiency competent cells at 30% regular price, the time will be announced tomorrow on our Facebook page.